AICS 3 Round .308/6.5cr Short Action Polymer Magazine

MDT

AICS .308/6.5cr SA 3 ROUND MAG

  • 3-round magazine.
  • Weighs 2 ounces
  • Sturdy, impact resistant polymer
  • Light & Stays quiet when inserted into magwell
  • Clicks in high and tight into M5 bottom metal

Fits the following calibers:

  • .243 Winchester
  • .22-250 Rem (works at reduced capacity)
  • .260 Remington
  • 6mm Creedmoor
  • .6mm XC
  • 6.5 Creedmoor
  • 7mm-08 Remington
  • .308 Winchester


QUESTIONS & ANSWERS

Ask a Question
  • I have a bergara in 308 , the magazine sticks out way more then I'd like it to. would this magazine fit my bergara ?

    Yes it will.

  • What is the height of the magazine from the base to the top of the feed lip?

    its 1.8"

  • Will this work with Magpul Rem 700 Short action mag well?

    If your Magpul bottom metal takes AICS magazines, which it should, this magazine will also click into and work with your Magpul bottom metal.

  • Will it fit the springfield armory waypoint 2020?

    yes it will.

  • Will this 3 round poly mag fit the Ruger American Hunter edition by Magpul with the AICS/PMAG setup? I am trying to find a flush mount magazine as opposed to the 5 and 10 round mags that are more common. Thank you for your time.

    If that bottom metal on your rifle takes AICS mags (which it appears it does) then yes this 3 rounder will work.

  • Do these come in 300 PRC also?

    Unfortunately they do not at this time.

  • Will it work with a 7saum with grayboe bottom metal?

    No it won't, you'll want aics mags for a .300wsm like this one, https://mdttac.com/300wsm-6-5-prc-mdt-metal-aics-magazine/

  • Will this work on a seekins precision m5 bottom metal?

    i tried to find the seekins M5 DBM on their website but couldn't find it.  If it takes AICS magazines then yes it will work.

  • Are these 3 round mags a improvement over the 3 round Ruger mags previously sold?

    These MDT mags do have advantages, they work with all M5 bottom metal (not just our Hunter M5 DBM), sit more flush with the bottom of the stock and they feed in all aftermarket actions where the Ruger ones did not in some cases due to the feed lips being too large on the Ruger ones.

  • Can someone try a 6BR case through it to if it would cycle? Thanks!

    i don't believe the 6BR case would work, there are specific mags for that caliber like this, https://mdttac.com/6br/

  • Will this fit Bergara hmr?

    Yes it will.

  • Will this fit a Bergara B14 HMR in .308?

    Yes it will!

  • What does everybody have against the awesome .300, 7mmRem mag, 30-06, .280 Rem, .280 ai,, .270 Win, etc? Why no long action?

    Preach brother!  I have no idea why no one has made a 3 round polymer magazine for those calibers yet.  I'm sure the companies that do will make one soon.

  • Will this fit a pacific tool and gauge bottom metal savage short action?

    Have yet to try it on a savage action.  If for some reason it doesn't work you can send it back for a full refund.

  • Will this fit the Bergara premier Approach 6.5 creedmore

    The Bergara premier approach rifle has a factory bergara floorplate on it.  To use an AICS magazine with it you would need to use a M5 style bottom metal that will feed this magazine.  The bottom of your stock would need to be modified as the M5 DBM's are a larger footprint than the Bergara floorplate.

  • Will these fit the savage scout

    If your savage scout is set up to take AICS style magazines it will work.

  • Will this work in the Hawkins hunter m5 dbm.

    Yes it will.

  • What COAL will this fit

    i found online that its 2.860" COAL but i'll need to verify this when i'm in the shop tomorrow with some calipers.

  • Hi. I have a new Tikka T3x Varmint in 6.5 Creed. Will this fit and mount flush? Thanks

    It will fit if you have a bottom metal that takes AICS mags 

  • Will this fit the savage 110 scout chambered in .308?

    Yes it will.

  • Would this magazine fit a Savage 110 scout model, chambered in.308?

    yes it will as long as your savage bottom metal is setup to take aics magazines.

  • I have the Sig Cross rifle. Will this fit in the mag well?

    Yes it will.

  • Will this work with 6mm dasher

    It will not but this will, https://mdttac.com/6br-mdt-metal-aics-magazine-10-rnd/

  • Would it fit a B-14 short action?

    Yes if you have the factory bergara bottom metal that takes AICS mags.

  • Will this magazine fit a Savage Haymaker 450 Bushmaster ? It uses a AICS 7.62 magazine .

    It will work but i hear from customers that feeding is not reliable and to my knowledge there isn't an AICS mag specifically for the .450 bushmaster.

  • Will this fit in an MPA ultralight folding stock?

    Yes it will.

  • Will it fit ti Bergara B14 Crest , 6,5 Creedmoore ?

    Yes it will.

  • Will this 3 round AICS mag work in a Savage Impulse?

    Yes it will if your savage bottom metal takes AICS mags.

  • Will this magazine work with 6.5 PRC?

    no it won't, you'll want this magazine, https://mdttac.com/300wsm-6-5-prc-mdt-metal-aics-magazine-3-rnd/

  • Will 6.8 Western fit in this?

    for that caliber you would want this magazine, 300WSM / 6.5 PRC MDT Metal AICS Magazine - 3 RND (mdttac.com)

  • Will this 3rd work with the Grayboe m5 bottom metal? The bergara 3rd isn’t long enough and it won’t catch.

    yes it will.

Customer Reviews
5.0 Based on 19 Reviews
5 ★
100% 
19
4 ★
0% 
0
3 ★
0% 
0
2 ★
0% 
0
1 ★
0% 
0
Customer Photos
Write a Review

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
BG
01/04/2024
Barry G.
United States United States

Flush magazine

Great finish and the feed flawlessly

DM
11/09/2023
Doug M.
United States United States

MDT mag

Runs great, drops free.

DS
09/26/2023
Daniel S.
United States United States

Product review

Worked great for my new build

MG
07/14/2023
Mitch G.
United States United States
I recommend this product

308 Mag

I really like this product, ultralight and seems solid. Seems to work great so far….. I will know more at the range. Oh and pretty quick delivery…

KR
05/03/2023
Keri R.
United States United States
I recommend this product

Perfection

High quality and fit perfectly in my Defiance Ruckus action and looks great.

Grayboe AICS 3 Round Short Action Polymer Magazine ReviewGrayboe AICS 3 Round Short Action Polymer Magazine Review