Grayboe Hunter M5 DBM - Remington 700

Grayboe

GB-HNTR-M5-SA-DBM

The Hunter DBM was created to look like a floor plate but function as a detachable box magazine system.  It takes all AICS 3, 5 or 10 round magazines.  No more switching back and forth from your BDL floor plate for hunting and your M5 DBM for competition/target shooting.  This is the only bottom metal you'll need!


  • Anodized matte black for exceptional wear resistance
  • Accepts all AICS type magazines.  Magpul mags can be finicky and may not work.
  • Fits all stocks inlet for a M5 bottom metal.  *If your stock is inlet for any other bottom metal this Hunter M5 DBM will not drop in and may require some fitting if your stock is not a Grayboe.  Your stock must be inlet for a M5 bottom metal. 
  • Compatible with Rem 700 and 700 clone actions like Bergara, BigHorn, Stiller, Defiance, etc. 
  • Short length weighs 3.1 ounces
  • Long weighs 4.5 ounces and takes 3.715" length AICS magazines
  • Smooth, sleek and snag free rounded trigger guard
  • Flush, snag free, inside the trigger guard magazine release lever
  • CNC machined out of billet aluminum
  • Fits all Factory Rem 700 & aftermarket triggers 
  • New action screws included

 

QUESTIONS & ANSWERS

Ask a Question
  • Will the hunter M5 DBM work for 300 prc

    Unfortunately not, we don't have a CIP length Hunter M5 DBM.  Only our standard Grayboe M5 DBM in CIP length will work with the .300PRC.

  • i have a remington 700 awr in 300 win mag with the outlander stock. is this the bottom metal i need to use?

    Your Outlander stock will need to be opened up for a M5 bottom metal to get the Grayboe Hunter M5 DBM to fit and feed the magazines correctly in the stock.  We can do this mod for you here in shop for $60 if you want.

  • Is the GRAYBOE HUNTER M5 DBM - REMINGTON 700 available in CIP length?

    Unfortunately it is not, only in short and long lengths.

  • Will fit in a Remington Long action 7 SAUM

    Do you currently have AICS magazines for your 7 saum?  If so, yes it will take all AICS magazines.

  • Any idea when these will be back in stock

    back in stock now!

  • Will this fit a Bergara Premier Rdgeback with the removable magazine? Seem obvious it will. Better safe than sorry though. The paddle release currently on the gun isn't best for hunting - gets caught on other gear and brush releasing the mag.

    Yes it will, it will drop right in.

  • Will this three rd mag work for a 30-06 ?

    The polymer 3 round mags we carry are only for .308/6.5cr cartidges.  A 3 round mag for your 30-06 can be purchased here https://accurate-mag.com/shop/magazines/30-06-springfield-sssf-magazine/ and our bottom metals will take those mags.

  • Will this work on a Bergara b14 6.5 PRC

    Yes it is compatible with your bergara b14.  your stock will need to be inlet for this bottom metal.

  • are these in stock right now in SA and will they take the the Accurate mag for the 300 wsm and ^.5 PRC 3 and 7 round mags please let me know

    Yes they are in stock and will fit those accurate mag magazines.

  • Will this fit magpul mags?

    Yes it will fit AICS magpul mags.

  • Does this come with a long action flush fit magazine

    No the bottom metal does not come with a magazine.

  • Will this fit a Bergara B 14 if I order a new Terrain stock for y’all?

    Yes our bottom metal is compatible with a B14 action.  When ordering the stock, for the bottom metal inlet just select "Grayboe DBM" and the Hunter M5 DBM will drop right in.

  • Will it fit Berger’s HMR inlet?

    Unfortunatley not, the Bergara factory DBM is its own footprint and is not a M5 inlet.

  • I currently have a Ridgeback built with the BDL plate. Rifle is chambered in 300 WM, Remington 700. Can I convert to this M5 DBM without modifying the stock opening? Assume Long length for 300 WM?

    Unfortunatley the stock will need to be modified and opened up for any M5 DBM to fit.

  • Will this fit a Bergara Highlander (700 style action) with the Graboe stock? Any machining required?

    Unfortunately it won't, the stock will need to be opened up to accept a M5 DBM bottom metal.

  • Will this fit a Bergara b14 hunter?

    Unfortunately it will not, your stock will need to be opened up on the bottom to fit the M5 DBM.  All M5 DBM's, like the Grayboe ones, are a larger footprint than the Bergara floor plate currently on your rifle.

  • Any projected date for a long action CIP length bottom metal in the hunter configuration?

    At this point we don't have a hard set date on when that will be unfortunately.

  • Can you use a magazine OR a bdl plate on this? Or is it purely magazine fed?

    Purely magazine fed.

  • What's the maximum MAGAZINE length for the Long action (not max OACL).

    3.750"

  • Are these still being made? Is there a signup or notification list?

    Yes they are, once we have them back in stock we will be emailing everyone on our mailing list that they are back in stock.  Have you singed up for our Newsletter?

  • Will this work with WSM/RSAUM aics mags?

    Yes it will.

  • I might have missed this somewhere but Is this made for metal or polymer

    it takes metal or polymer mags.

  • When do you expect to have the long action hunter dbm bottom metal available?

    they are 6 weeks out from being in stock.

  • When do you anticipate the Hunter DBM will be available? Can I get an email notification or do I just need to continue to check the website?

    should have them back in stock in 4 weeks.  Unfortunately we don't have an email notification link when they are back in stock at this time.

  • Will this fit any stock capable of accepting a M5 DBM?

    yes it will.

  • Perhaps a silly question, but does this fit the Outlander stock?

    Yes it does, you can order an Outlander for it here, https://www.grayboe.com/collections/stocks/products/outlander.  For $35 we modify the stock to accept the Grayboe or any M5 style DBM.

  • Is this item put of stock permanently? As in discontinued? If not, how soon will it be back in stock? Is it possible to place a back order? Thanks!

    we are currently assembling them as i type this.  Once we have them back in inventory, which should be a day or two, they will be back in stock and ready to order.  You can place a backorder if you'd like, please email sales@grayboe.com to do so.

  • will a timney/trigger tech straight trigger fit this floor plate?

    yes it should.  if it doesn't for some odd reason, you can return it for a full refund, no questions asked.

  • Will this work with AICS CIP length (3.850") 338 Lapua Magazines?

    Unfortunately we don't have the CIP model out yet.  Its still in its designing phase.

  • What is the max COAL your long DBM will support?

    that will depend on your magazine, typically its 3.625".  However, the inner dimension of the magazine well on the DBM is 3.738".

  • What's the weight for the SA?

    it weighs 3 ounces.

  • what is the max COAL for a SA ?

    that will depend on the manufacturer of your magazine.  If it has no binder plate than it could be 2.960", just depends on whose mag you have.  Regardless, any short action AICS magazine will fit into the hunter DBM.

  • What is longest coal the short action allows

    that will depend if your magazine has a binder plate or not.  without a binder plate max COAL would be 2.960".  Regardless the Hunter DBM will fit all SA AICS magazines.  The inner mag well on the DBM is 3.070".

  • Love this thing. Want it badly. How do I get an m5 cutout on my current factory style 700 Will it work w 300 rum?

    you currently have a factory stock on your 700 rifle?  If so, you'd need a gunsmith to open up the bottom of your stock to accept the DBM.  Yes our long action DBM will work for the .300 rum with a length of 3.6".

  • Will this fit a Remington 700 in .308. I’m not sure the model but it has a 5R barrel . What magazine will it accept. Thanks

    It will fit if the stock is cut for an M5 bottom metal inlet. It will accept AICS mags 

  • Will this work with 7mm PRC

    yes it will if you are using a 3.715" length magazine.

  • Do you make a bottom metal for a tikka t3x 7mm rem mag?

    Unfortunately we do not. Our Tikka inlet stock works with the factory plastic components, and then we make a CTR bottom inlet as well. Red Hawk Rifles is a good place to check for the Tikka bottom metals

  • Short or Long? I have a stock that takes the M5 bottom metal. My mag is 3.715. Would it require a short Bottom metal or a Long one?

    you would need a long for that magazine length. Should have longs back in stock within a week or two.

  • When will you have Long action back in stock?

    we hope to have them back by this summer.

  • Will you have the Hunter M5 DBM in Remington 700 longg action soon?

    Yes we hope to have it available in April.

  • When will the hunter m5 be back in stock

    I'm told this friday.

  • Will this work for 7mm prc?

    Unfortunately not, you would want this bottom metal for the 7mm PRC in long length, https://www.grayboe.com/collections/bottom-metal/products/grayboe-dbm-remington-700

  • Will a MDT 3 round short Magnum magazine fit?

    yes it will.

  • Would this work, or could it be modified to work with the ARC Coup de Grâce trigger hanger?

    yes it will work with any action that has a trigger hanger.  We modify the bottom metal to work with trigger hangers.

  • Any idea when these will be back in stock?

    yes we will have them back in stock in the next 2 weeks.

  • Do either of the DBM bottom metals work with aw mags?

    They do not, only AICS mags.

  • Will this fit without alteration on the Rem700awr stock you guys made?

    No it won't, the bottom of the stock needs to be modified to accept and M5 bottom metal.  We can do that here in shop for $100.

  • Will this work on my Remington 700 tactical heavy barreled 308

    Yes it is compatible with your rifle but the stock will need to be inlet/modified for a M5 bottom metal for it to fit into the stock.

  • I have a Greyboe M5 bottom metal for my newly ordered 270 stock with a M5 inlet. What kind of magazines should I look for?

    Best bet would be to get a 30-06 aics magazine like seen here, https://mdttac.com/30-06-mdt-metal-aics-magazine/ and bend the feed lips inward to keep the rounds in the mag.

  • I understand this product accepts all AICS magazines but I'm confused on what length magazine I need. I'm looking at 5rd 30-06 mag from MDT and Accurate. Accurate has both 3.715" and 3.850" length mags. MDT has 3.56" and 3.715" mags. Which one do I need??

    You will want the 3.715" length AICS magazines for this bottom metal.

  • What bottom metal and magazine do you recommend for 7mm PRC

    You'll want to use a long action length M5 DBM and a steel .300 win mag AICS magazine like this, https://www.grayboe.com/collections/magazines/products/aics-long-action-steel-magazine.  You may need to bend the feed lips open a hair so the rounds sit up high enough that the bolt will catch the rounds when pushed forward.

  • Will this fit the SA Magnum magazine by Hawkins? Trying to make this work for a 6.5 PRC. Thanks

    If you have the short action length mag it will work, if you have the medium length mag it will not.

  • Will this work for 28 Nosler

    yes it will if you go with this magazine in 3.715" length.  https://accurate-mag.com/shop/magazines/300-remington-ultra-mag-sssf-magazine/

Customer Reviews
5.0 Based on 41 Reviews
5 ★
100% 
41
4 ★
0% 
0
3 ★
0% 
0
2 ★
0% 
0
1 ★
0% 
0
Customer Photos
Write a Review

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
JR
09/23/2024
john R.
United States United States
I recommend this product

Hunter DBM

Great quality and fit. Drops right in and feeds perfectly.

BG
01/04/2024
Barry G.
United States United States
I recommend this product

Hunter M5

This worked great. Fit was perfect, and feeding from MDT 3 round mags were fine. Tried another brand and feeding left a lot to be desired. Thanks for a great looking and performing product.

BS
12/09/2023
Blake S.
United States United States
I recommend this product

Great product!!

Everything looks great, good customer service!!! Need a 10/22 compact stock!!!

MM
12/01/2023
Michael M.
United States United States
I recommend this product

Great Bottom Metal

This is a great product for a dual purpose hunting/target rifle. AICS magazines fit perfectly. The fit and finish are top-notch. The unit fit perfectly into the M5 cut-out in my stock.

DS
09/26/2023
Daniel S.
United States United States
I recommend this product

Customer Service

Ryan did an awesome job helping me out with my rifle. Glad to know there is companies like this that actually care.